GW-uni2 Plus 업그레이드 방법

​

1. GW-uni2 Plus 최신 펌웨어를 다운 받습니다.
2. GW_uni2 plus_V1.22.00를 실행시켜서 GW-uni2 Plus PC program을 install 합니다.
3. Install후에 GW-uni2 Plus.exe를 실행합니다.
4. GW-uni2 Plus의 전원을 켜고 USB cable을 이용해서 PC와 연결합니다.
5. GW-uni2 Plus PC program에서 ‘USB Connection’ 버튼을 눌러 GW-uni2 Plus와 연결을 합니다.
6. 자동으로 Upgrade가 진행되며 Upgrade가 완료 메시지가 나오면
   GW-uni2 Plus USB cable을 제거하고 전원을 끈 후 다시 시작합니다.

(주의사항)
    Upgrade 진행중에는 GW-uni2 Plus 전원을 끄거나, USB cable을 PC에서서 분리하지 마십시요.
    Upgrade 후에 GW-uni2 Plus의 Pass/Fail 카운팅 값이 영”0”으로 지워집니다.

​

      -----------------------------------------------------------------------------------------------------

GW-uni2 Plus Upgrade

  Please upgrade the firmware of GW-uni2 Plus into the latest version to solve the existing errors.
  The following steps shows how to upgrade :

1. Please download the latest version of GW-uni2 Plus(GW_uni2 plus_V1.22.00) on Seminix website

   to your PC.
2. Execute "GW_uni2 plus_V1.22.00" file to install the GW-uni2 Plus driver software on your PC.
3. After installation, execute the GW-uni2 Plus driver software(GW-uin2 Plus.exe) and turn on the

  GW-uni2 Plus power switch
   and then connect GW-uni2 Plus with your PC via USB cable.
4. In the GW-uni2 Plus software on PC, click the "USB connection" and then it will upgrade the

   firmware of GW-uni2 Plus automatically.
5. After the firmware upgrade is done, please restart the GW-uni2 Plus (Power off and on).

(Caution)
    DO NOT power off GW-uni2 Plus and DO NOT disconnect USB cable during updating.
    The existing counter values of Pass & Fail on GW-uni2 Plus will be erased with zero ("0").